- Home
- »
- Our Product Range
- »
- VCB Power Pack
VCB Power Pack
The Power pack is used as a power source for VCB panels in substations where station battery supply is not available. Power Pack stores the energy in backup Capacitor from line connected PT and that stored energy can be used to Trip / Close the Circuit breakers when AC Input is not available. There are total two outputs. One output is for stored energy and other is for non-stored. Stored output can be used when AC input is not available. Non-Stored output will be available as...
Read more
Get CALLBACK
Power Pack With Battery Back Up
Ask For Price
Product Price:
Get Latest Price
Product Brochure
Product Details:
| Usage/Application | Industrial |
| Country of Origin | Made in India |
| Automation Grade | Automatic |
| Design | Standard |
| Continuous Load | 100 Watts. (For 10 minutes) |
| Impulse Load | 450 W For 240 M Sec.(min. 10 pulses) |
| Material | Mild Steel |
| I Deal In | New Only |
| Voltage | 110 VAC OR 230 VAC +20% , -30% |
| Brand | SME |
| Output Voltage | 24 / 30 / 48 / 110 / 220 VDC |
| Output Load | 100W Nominal |
| Overall Dimension | 280 mm (w) x 190 mm (h) x 210 mm (d) |
| Input Burden | Less than 50 VA During Charging Period. Without Output Load. |
- The power pack is used as a power source for VCB panels in substations where station battery supply is not available. Power Pack gets charged from line connected PT (burden 200VA). It can supply DC connected loads for operating Close/trip coils and other essential loads such as auxillary supply to protection relays etc.
- Over Voltage Protection.
During No Load operation and battery charging ON, Output DC voltage shall not exceed more than specified voltage. - Short Circuit Protection.
Short circuit protection has been provided on the output side. When short circuit condition is removed output resumes automatically, without any manual reset. - Indications Provided on the Front of the Unit
1) Charger ON.
2) Output Switch Off.
3) Battery Operation.
4) Output Overload.
5) Output ON. - Output ON/OFF switch is provided on front side of the unit
Yes! I am Interested
Get CALLBACK
Power Pack with Capacitor Backup
-
-
-
- +8
Ask For Price
Product Price:
Get Latest Price
Product Brochure
Product Details:
| Power | 50WSec / 100WSec |
| Usage/Application | Industrial |
| Country of Origin | Made in India |
| I Deal In | New Only |
| Size/Dimension | 390[L] x 200[H] x 150[D] mm |
| Automation Grade | Automatic |
| Phase | 1Phase / 3 Phase |
| Input Voltage | 110 / 230 / 440 VAC |
| Output Voltage | 24 / 48 / 110 / 220 VDC |
- The Power pack is used as a power source for VCB panels in substations where station battery supply is not available. Power Pack stores the energy in backup Capacitor from line connected PT and that stored energy can be used to Trip / Close the Circuit breakers when AC Input is not available. There are total two outputs. One output is for stored energy and other is for non-stored. Stored output can be used when AC input is not available. Non-Stored output will be available as long as AC input is present.
Yes! I am Interested
Explore More Products
Get Best Quote
Get Best Quote
Get Best Quote
Get Best Quote
Get Best Quote